Could You Install Your Own Garage Door?

It is very easy to take your garage door for granted. After all, most of the time, you are able to open and close it without any problems. However, when it stops working, most people will stop taking it for granted. This is particularly true if it stops working at a very inopportune time, such as when your car is stuck in the garage and you need to go to work. Additionally, if the garage ends up being stuck open, it can bring unwanted hot or cold air inside of the house. This is why it is good to be in touch with a garage door repair professional.

If you do not have a lot of experience with garage door repair, you might have many questions. For example, you might wonder, what exactly is a residential gate operator? What is the average price to replace garage door in my area? What is the average broken garage door cable cost? Can a garage door be repaired if it has been broken for a very long time? What is the cost to repair door if only a minor repair needs to be done? Most of the time, a garage door repair professional will be able to answer these questions for you.

As shown in the video, there are ways that you can go about installing your own new garage door, even if you do need some help to do so. It is good to understand all of the components that play a role in the operation of the garage door before you do this, however.

If you want to be safe and effective in installing your garage door, you need to make sure that you have all of the tools that you need first.

Video Source

You need a level, a drill, drill bits, safety glasses, adjustable locking pliers, a Philips driver bit, a socket bit, a hammer, an open-ended wrench, and a 1/2 inch diameter rod. You might need even more than this, depending on exactly what you are going to do with the garage door. After this, you will have to release the tension in the garage door, disconnect the door you have right now from the garage door opener, install sectional garage door panels, secure the hinges and install the tracks, attach the spring assembly to the track, bolt the tracks to each other, install the springs, install the torsion rod and pulleys, attach the cable, and tighten the springs. You might need to get some assistance with this process if it is too much.

Leave a Reply