Are you looking for cool DIY house projects to do? If you have extra time on your hands, you can invest some in upgrading your home. This is one of the most effective ways to increase the value of your home. The only thing you need to keep in mind when tackling DIY projects is to have enough equipment and instructions. You can also do with some instructional videos. Here are some of the cool DIY house projects to do.
Install New Kitchen Cabinets
Installing kitchen cabinets on your own can be quite intimidating. However, this is one of the cool DIY house projects you can do, and it doesn’t have to be complicated. All you have to do is screw a series of boxes onto the wall and then to one another. If you manage to install the cabinets on your own, you can save about $500 (and probably much more) in installation charges.
To install kitchen cabinets, you will probably need a few tools. You will need a screw gun, an accurate 4-ft. level, some screws, and several screw clamps. You must also get a drill and a block plane or belt sander. Before you start the installation, you must make sure you have the right cabinets.
When you order the cabinets from the kitchen cabinet companies, make sure you inspect them immediately so you can confirm that all of them match the ones on your cabinet plan. You must also ensure that all the parts are included and that nothing is damaged. One mistake can mess up the entire project and make it take longer than necessary.
Renovate Your Bathroom
Is your bathroom old and unsightly? You can spare a weekend or two to spruce things up and make it look better with a few modifications. There are several small tasks that you can complete on your own without hiring home contractors, including the following: installing bathroom cabinets installation, upgrading your mirror, painting the bathroom, and even changing the windows. Small projects can improve the way your bathroom looks.
Before you attempt any DIY bathroom job, you must make sure you have enough time and equipment. You must also research and take all the necessary steps so that you don’t make unnecessary mistakes. Bathroom upgrades are among the cool DIY house projects.
Repair Your Roof
Your roof is one of the most important structures of your house. It does an important job of protecting you from the elements and improving the energy efficiency of your home. This is why you need to invest a lot of time and money in roof maintenance. Fortunately, it’s not all times that you need to hire someone to repair your roof. There are some small tasks that you can complete on your own.
However, you need to keep in mind that roof jobs can be quite dangerous. Before you attempt anything, you must make sure that you have the right safety equipment. You should also research a lot and find out some of the common dangers of DIY roof jobs. You can fix small things like a missing shingle here and there, but when things get complicated, it’s advisable to work with a roofing professional.
Install New Window Blinds
A blind installation is another cool DIY house project that requires very few tools. You will need a screwdriver, drill, measuring tape, and level. While there is a general approach to installing blinds, you must keep in mind that your installation instructions may vary depending on the blinds you get. This is why you must always refer to your particular product for precise installation instructions. Once all things are in place, you must just follow the installation instructions step by step. This project shouldn’t take a lot of time to complete.
Seal your Concrete Floors
Do you have concrete floors somewhere on your property? It’s important to seal them from time to time. This is usually done using a concrete sealer, and it’s one of the cool DIY house projects you can do on your own. Before you start the process, you need to prepare your floor for sealing. This process is probably longer than the sealing itself. Before you start, you need to remove everything from the space you want to seal. After that, you must remove the skirting boards with a putty knife. You then have to sweep up all the debris remaining on the floor.
Once the floors are clean, you should degrease them. There are several degreasing products to choose from. If there are any sections that are super oily, you can use a wire brush to remove the excess oil. You can then rinse the floor using a wet mop. Once the floors are dry, the next step should be filling all the cracks with a quick-drying concrete filler. Your floor is now ready for sealing.
To seal your concrete floor, take a small amount of sealer and apply it evenly on your floors. It’s best to use a paint roller for this. To seal the edges, you can use a paintbrush. It’s important to remember to work from the furthest area of your space and move towards the exit. That way, you won’t end up boxing yourself in.
After applying the sealer, you need to give it some time to dry. Usually, this can take about 24 hours. There are ways to speed up the drying process. For instance, you can use fans or dehumidifiers. Once the floor is dry, you can now put the molding back and return all furnishings to your room.
Fix Those Cracks in Your Driveway
The majority of driveways are made using asphalt. The material is quite effective, but like the asphalt you see lining the highways, asphalt driveways also develop cracks over time. When this happens, it’s important to fix those cracks as soon as possible.
Fortunately, fixing cracks is not too complicated. If you are looking for cool DIY house projects you can do, this is a simple process that you can do on your own. Everything you need to complete this task should be available at your local hardware store.
Before you start patching cracks, you must first clean your driveway. That way, the patch filler material can adhere easily. If the cracks are obstructed by stones and broken asphalt pieces, you must remove them with a hammer and chisel. Next, you can take a wire brush and remove dirt and debris from the cracks. You can follow with a garden hose to ensure there is nothing left in the cracks. However, if you use water, you must let the area dry up properly before you apply the patching material.
Once you are done with the cleaning and the cracks are ready, you can then start filling the cracks. The filler material needed is rubberized asphalt-emulsion crack filler. Avoid getting this asphalt crack filler material where there are no cracks because it will cause stains. You can apply the filler using a caulking gun if available.
Replace The Door to Your Garage
Garage doors are quite heavy. This is why older garage doors are a frequent scene of home accidents. Once you notice your door is now old and unsafe, you need to replace it as soon as possible. Most of the garage door installation process is quite easy, and you can do it on your own. However, you need to get help so you can remove the old door. Once the old door has been removed, you can then proceed to install the new one, which shouldn’t be too difficult as long as you know how and you have the right equipment.
The installation process will depend on what type of door it is and the garage door spring type. Springs usually come in two styles. These can either be torsion springs or extension springs. To ensure that the installation process goes as planned, you may need to find an instructional video that tells you step by step what you need to do to install the door successfully. That way, you can replay if you fail to pass a certain stage and see where you went wrong. You must also make sure that you have the right equipment before you kick start the job.
Upgrade Your Landscape
If you have a lot of time on your hands, doing your own landscaping is one of the cool DIY house projects you should consider doing. The process is not too difficult. However, there is a lot of hands-on work involved. Before doing anything, you first need to look at your yard and determine what modifications are needed. Once that is done, you can then start thinking of the types of plants to include. The idea is to make something out of your imagination.
When doing DIY landscaping, you can start by writing down your goals. What do you want the yard to look like? As you are doing this, you can start collecting ideas from the internet. You can also look at magazines to get inspiration. It’s also possible to get ideas from botanical gardens around you. That way, you can get a feel of what outcome you are looking for.
With your goals written down, study your site. Notice which areas get sunlight, how much of it they get, and how long. This will help you to determine sections that are suitable for plants. You must also look into things like drainage issues. This will allow you to choose your plants properly as well.
Once you know the conditions of your yard, you can then start to choose your plants. Make sure you research the needs of your plants before putting them in the ground. You must also find out if the plants you want are available in your area. Landscaping is not difficult. You must, however, remember to get the right equipment. Apart from the plants, you need to know what equipment is suitable for your needs. You will likely need things like a hose and sprinkler system, among others.
Upgrade Your Water System
Are you looking to upgrade the water system in your house? This is one of the cool DIY house projects you can do. There are certain aspects of your water system that you can upgrade on your own. For instance, you can install a water softener or a filter, and you can even increase the pressure of the water in your home by installing a pressure booster.
Tasks like installing a water softener and installing filters on your faucets are quite straightforward. However, increasing your water pressure can be a tricky endeavor. Sometimes the water pressure can be low even if the pipes in your home are new. This can be caused by several things. However, if you try everything and it doesn’t work, the next most sensible step would be to install a water pressure booster at the water meter.
For this job, you will need an adjustable wrench, an air compressor, an air hose, a tube cutter, and a soldering torch. You will also need copper pipe and fitting, flux, a water pressure booster, and Teflon tape. Before you start the installation, you need to test your water pressure. This can be done by hooking up a pressure gauge to the outside water spigot. After turning on the water, the pressure gauge will take a reading, and you can figure out what pressure you are working with. You then need to decide what pressure you need before installing the pump. The pump installation process is a bit lengthy, and you may need a long instructional, step-by-step video to guide your installation. That way, you won’t mess things up and end up making the situation worse.
These are some of the cool DIY house projects you can undertake. It’s important to ensure that you know the step-by-step processes of each project so that things don’t go wrong midway. However, even if you study the steps, things can still go sideways. If that happens, just retrace your steps, correct things, and move on.